@3ric2hew
I'll take a closer look.

@ikt cool thanks man
autoload for model def works

@3ric2hew
Hmm, for now make sure your plates are exactly 8 characters long.

@3ric2hew
Can you show the car your autoload is for, and what you had saved in the configuration?

Also, try this:
https://cdn.discordapp.com/attachments/849006026853187654/857385610393157652/CustomGearRatios.asi

(It's on my Discord, so if it isn't downloadable, join the Discord server linked on my profile, and try again).

@ikt okay i will tried it still same, i first notice this problem on bodhi2 when i mod the car in lsc then configured a custom gear and save as plate loaded only then after every respawn the gear always revert back to model loaded custom gear only completely ignoring the plate setup so i think maybe this is the car problem then proceeded to try another car adder but still same

here the autoload for model
<?xml version="1.0"?>
<Vehicle>
<Description>Bodhi - 3 gears</Description>
<ModelName>BODHI2</ModelName>
<ModelHash>2859047862</ModelHash>
<PlateText>autoload_model</PlateText>
<TopGear>3</TopGear>
<DriveMaxVel>50.100002</DriveMaxVel>
<Gear0>-3.80</Gear0>
<Gear1>2.805</Gear1>
<Gear2>1.693</Gear2>
<Gear3>1.002</Gear3>
</Vehicle>

and here for plate
</Vehicle>
<?xml version="1.0"?>
<Vehicle>
<Description>trev</Description>
<ModelName>BODHI2</ModelName>
<ModelHash>2859047862</ModelHash>
<PlateText>BETTY 32</PlateText>
<TopGear>4</TopGear>
<DriveMaxVel>60.18002</DriveMaxVel>
<Gear0>-3.3333333</Gear0>
<Gear1>3.3333333</Gear1>
<Gear2>1.825726</Gear2>
<Gear3>1.2222012</Gear3>
<Gear4>0.9</Gear4>
</Vehicle>

@3ric2hew
Thanks, this should fix it:
https://cdn.discordapp.com/attachments/849006026853187654/857577981912547348/CustomGearRatios.asi

(It just went through the list in order and applied whichever matched first, but this new one should check the matching plate & model first and then checks just for model).

@ikt yea u fixed it working like a charm thanks bro and i cant believe i forgot to leave a rating the day i downloaded this

@ikt how do you get it to act like a cvt cause when I try to do that it doesn’t show the infinite ratio

@jrem7315
It works for vehicles without the CVT flag, which have one gear. Then the script will adjust the gear ratios continuously, and there are settings for min/max bounds for the gear ratio range.

@ikt I figured it out thank you

Hi bro! I have collected 3 large dlc with different cars for a very long time and have been using this mod for a long time. I registered real gear ratios for cars, but the gear ratios in the game are not correct - the car has too high speed, or does not accelerate to maximum. DriveMaxVel is similar in action to engine speed, respectively power. One more final drive gear is missing, which will multiply the DriveMaxVel parameter! Then DriveMaxVel can be left for sufficient power, and the final drive parameter can be used to set the correct speed at the real gear ratios! =)

@Reactors

No, read the documentation. It's the "final drive" speed, e.g. what speed the car would drive in the gear with a 1:1 ratio. You need to calculate/test this to match actual data.

@ikt There's no rev limiter in this mod. GTA doesn't limit revs, but Manual Transmission can provide this if wanted.
Severe rpm limit? I have limited.) But I need to set the number of revolutions of a particular engine. There are large, slow-rpm diesel engines, and there are high-rpm gasoline engines. If I tune fInitialDriveForce and DriveMaxVel, I get either insufficient or excessive thrust and speed. I try very hard to make maximum realism, and your mods (the best mods!) Help a lot with this! But I would like some kind of solution to limit rpm of a particular engine. =)

Dumb question, will this be updated to accept ratios higher than 10.0:1? I found out the hard way when trying to replicate the 8 speed PDK from the 992 Porsche 911 for the new Comet S2, and found out that first gear is 14-something:1, otherwise this is a phenomenal mod that I've used for quite some time now!

@AlyxandraVance
Sure, when I get to it.

In the meantime, the ratios can be edited from the files themselves (GTA V Folder\CustomGearRatios\Configs\YourConfig.xml) where you can use any ratio. They should stay as long as you don't "hover" over the ratio in the menu when in-game, because that resets it to 10 again.

@Reactors
No, there's no rev limiting. MT only limits the top *range* of the RPMs. GTA doesn't know RPM, it only knows 0.0 (off), 0.2 (idle) to 1.0 (max RPM).

For fInitialDriveForce make it the torque/weight ratio.
For DriveMaxVel make it the real top speed in the gear where the ratio is closest to 1.0 (or do some maths).
Then you need to tweak drag to give a realistic top speed.

@ikt strAdvancedFlags400000 affects the mass as well as the mass of the flywheel. fInitialDriveForce, fDriveInertia, fInitialDriveMaxFlatVel are configured correctly with the flywheel changes. It is the rpm limiter that is lacking, for realism.

Okay I've literally tried everything.. I don't know why but it doesn't load. here's a list of my mods I don't know which are and aren't compatible, please help me lol. simple trainer, menyoo trainer, manual transmission, vstancer, packfile limiter, heap adjuster, a config mod, scripthook, and 8 add on vehicles.

@ikt I've also looked into the asi loader log and it says that it failed to load cgr

@Cosmo_oberon
Get https://aka.ms/vs/16/release/vc_redist.x64.exe

@Ikt it works thanks!!!